System Requirements
Required Ignition Version
The Ignition Ewon® Connector module has been designed to work with Ignition 8.1.1 and newer.Installing a Suitable Ignition Version
If you do not have a suitable version of Ignition, you may download one from the Inductive Automation Downloads Page. The Ignition Ewon® Connector module does not require additional Ignition modules to be installed, only the core installation (and included modules) is required.Required Hardware
The Ignition Ewon® Connector has been designed to take advantage of the Ignition server's available hardware resources. Multi-threading and asynchronous processing allow the connector to simultaneously handle multiple requests at a time.Minimum Hardware Requirements
CPU: 2 cores
RAM: 4 GB
The minimum hardware requirements are suitable for a small number of devices and tags. If you are planning to connect many devices or tags, you should consider increasing the hardware resources available to Ignition and its modules.
These requirements match those of Ignition, with additional memory (RAM) required for the connector to run.
Recommended Hardware Requirements
CPU: 4 cores
RAM: 8 GB
The recommended hardware requirements are suitable for most installations. If you are planning to connect a large number devices and/or tags, you should consider increasing the hardware resources available to Ignition and its modules.
There is no upper limit on the number of devices and tags that can be connected to the connector, but the hardware resources available to Ignition will limit the number of devices and tags that can be connected. If you experience a degradation in performance, it is recommended to increase the hardware resources available to Ignition and its modules. This may include increasing the number of CPU cores, increasing the amount of RAM, increasing network bandwidth, or increasing the amount of storage space available to Ignition.